______________________________________________________________________________________________________________________________ 1 of 3 sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com rohs ac input 100-240vac +/- 10%, 47-63 hz single phase. turn on time less than 1 second under all rated load conditions. input current 115vac: 0.7a, 230vac: 1.5a. hold - up time <17 ms at 65w, nominal input (120vac). inrush current the inrush at 264vac, at a cold start, will not exceed 40a. overvoltage protection built-in input fuse s f1, f2: 2.5a, 250vac fuses provided on all models. overload protection hiccup mode efficiency up to 90% typical. short circuit protection hiccup mode earth leakage current < 3 0 0 a @ 2 6 4 v a c , 6 0 h z , n o r m a l ; < 5 0 0 a s f c . touch current is <100 a nc, <500 a sfc @ 264vac, 60hz, measured from output to ground isolation input-output: 4000vac/2 moop input-ground: 1500vac/1 moop output power 65w continuous. medical safety standards ansi aami es/csa/en/iec 60601-1, 3rd edition ripple and noise 1% pk-pk max., 20mhz bw, differential mode. measured with noise probe directly across output terminals. switching frequency variable 50-75khz typical. output voltage see chart. operating temperature 0 ? to 70 ? c (derate from full rated power above 40 ? c). voltage adjustability voltage pre-set by fixed resistance. cooling convection minimum load not required. output power derating see derating chart total regulation +/- 2%. see chart. storage temperature -40 to +85 ? c. transient response 5 0 0 s m a x . , 5 0 % l o a d s t e p , t y p i c a l . relative humidity 5% to 95%, non-condensing mint1065d 65w single output series medical, 3 rd edition certified universal input power supply 3 year warranty ? 65w convection cooled ac-dc power supply ? universal input 90-264 vac ? class i or class ii input versions ? less 0.5w no load power dissipation ? rugged emc compliant design ? 2? x 4? x 1.2? package ? ansi aami es/csa/en/iec 60601-1, 3rd edition certified ? meets efficiency level iv efficiency ? compliant (lvd, rohs) ? optional chassis/cover specifications all specifications are typical at nominal input, full load at 25 ? c unless otherwise stated .
______________________________________________________________________________________________________________________________ 2 of 3 sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com mint1065d1275k01 12v 5.25a 4.00a 120mv 2% 15.0 1.5v mint1065d1375k01 13.2v 4.80a 3.63a 140mv 2% 16.0 1.5v mint1065d1575k01 15v 4.33a 3.20a 150mv 2% 18.0 1.5v mint1065d1875k01 18v 3.50a 2.66a 180mv 2% 21.0 2.0v mint1055d2075k01 20v 3.25a 2.40a 200mv 2% 23.0 2.0v MINT1065D2475K01 24v 2.70a 2.00a 240mv 2% 27.0 2.0v mint1065d4875k01 48v 1.35a 1.00a 480mv 2% 55.0 4.0v vibration operating: 0.003 g 2 /hz, 1.5 g rms overall, 3 axes, 10 min. / axis non-operating: 0.026 g 2 /hz, 5.0 g rms overall, 3 axes, 1 hr. / axis shock operating: half-sine, 20 g pk , 10 ms, 3 axes, 6 shocks total non-operating: half-sine, 40 g pk , 10 ms, 3 axes, 6 shocks total pollution degree 2 overvoltage category ovcii (2500v for mains), ovci (1500v for secondary) dimensions w 2.0? x l 4.0? x h 1.17?. see outline drawing. operating altitude up to 4000m. weight 150 grams non - operating altitude -500 to 40,000 ft. "01" = standard model, 02 and higher indicates a m odified m odel. model number key 12 75 mint 01 output voltage: configuration: output pow er: # of outputs: 1 065 x k model: product fam ily: "k" = 3 pin header (class i input); "c" = 2 pin header (class ii input). "75" = output connector, 4 pin header. other options available, consult factory. "12" = 12v, "24" = 24v, etc. "d" = en60601-1 3rd edition certified, "c" = optional chassis & cover (class i only). "065" = 65w "1" = single output "m" = medical, "i" = internal, "nt" = new technology input connector: output connector: co nducted emissions en55011 class b, fcc part 15, class b. radiated emissions en55011 class a, fcc part 15, class a. static discharge immunity en61000-4-2, 6kv contact discharge, 8kv air discharge radiated rf immunity en61000-4-3, 3v/m. eft/burst immunit y en61000-4-4, 2kv/5khz.. line surge immunity en61000-4-5, 1kv differential, 2kv common-mode conducted rf immunity en61000-4-6, 3vrms power frequency magnetic field immunity en61000-4-8, 3a/m voltage dip immunity en61000-4-11 240vac, 0%/0.5 cycle, 40%/5cycles, 70%/25 cycles mint1065d 65w single output series medical 3 rd edition certified universal input power supply 3 year warranty output parameters model output current ripple total ovp number volts (v) open frame w/cover & noise regulation threshold emi/emc compliance specifications (continued)
______________________________________________________________________________________________________________________________ 3 of 3 sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com mechanical drawings and connector information output power derating curve data sheet ? 2012 sl power electronics corp. the information and specifications contained herein are believed to be correct at the time of publication. rev. 12-19-12 however, sl power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. specifications are subject to change without notice. mint1065d 65w single output series medical 3 rd edition certified universal input power supply 3 year warranty mint1065 series connectors input: j1 amp p/n 641937-1 pin 1) ac line pin 2) ac neutral output: j2 amp p/n 640445-4 pin 1) +vout pin 3) -vout pin 2) +vout pin 4) -vout mating connectors: p1 molex 09-50-3031 p2 molex 09-50-3041 pins: molex 08-50-0105 gnd connection (class i version) 0.187" faston tab
|
